Crossfire CFC2 CO2 Monitor
The Crossfire CFS CO2 sensor with 25 feet of cable may be plugged into the CFC1 controller at any time without any further setup. The CFS CO2 sensor also includes a light and temperature sensor.
Together, the CFC1 controller and CFS remote CO2 sensor provide an affordable dual zone CO2 monitoring and control system
- Plug and Play: The Crossfire CO2 controller will automatically detect the presence of the sensor and start to use it. The readings and information for this sensor will be shown as #2 on the controller LCD
- Precision CO2 sensor: Dual Wavelength NDIR sensor technology with altitude and temperature compensated. Designed specifically for greenhouse applications
- Light sensor to disable CO2 control if lights are off
- Temperature sensor for compensation and high temperature shut-off
Connection: 4 wire: 2 for power, and 2 for RS-485 serial communications. The connection is via a 25 foot CAT5 shielded cable. A removable rubber bushing protects the CAT5 cable to sensor connection allowing convenient replacement of the cable for a more suitable length or type.
Dimensions: 1.312” (33.5 mm) diameter, 4.4” (112 mm) long
Interface: 9600 baud, Modbus protocol (9600,E,8,1).Sensor Type: Dual wavelength CO2 sensor + Light and Temperature sensors
Compensation: Altitude and temperature compensated.
Range: 0 – 10,000 ppm
Accuracy: ± 50 ppm in the range of 0 – 1000 ppm & 5% of reading between 1000 and 10,000 ppm.
Resolution: 1 ppm
Repeatability: ± 20 ppm
Calibration: 6-12 months depending on environment.